+44 1284 530 700

Adjust your settings

International

UK & Ireland

USA

Back to the overview

Product quality

Promising results: disinfection using UV-C

Consumers who buy a bag of lettuce expect to ­find a clean product with a reasonable shelf life and no health risks. Processers need to meet this need without using excessive amounts of water and, in many countries, without using resources such as chlorine. Sormac investigated to what extent UV-C can disinfect washing water in its laboratory, on a pilot-scale as well as in a practical setting. The results are promising, as long as UV-C is used correctly.

Promising results: disinfection using UV-C

min Reading time

UV-C is ultraviolet light that lies outside the spectrum that can be observed by humans. The germicidal effect is the highest between 240 and 280 nm. At this wavelength, the light disrupts the DNA of microorganisms, such that they can no longer reproduce. These properties make UV-C extremely suitable for disinfecting water.

 

Measuring is knowing

The test results are unequivocal: the microbiological contamination in washing water with UV-C disinfection is more than 2 log (about 99%) lower than the contamination in washing water without UV-C disinfection, see graph.

Results with and without UV-C - Sormac.PNG

The microbiologically cleaner washing water also has a substantial positive impact on the washed end product. A reduction of approximately 1.5 log (some 96%) was measured in a 2-step washing process that involved UV-C only in the second washing cycle, shown in the graph below. Without using UV-C, the reduction is no more than approximately 65%.

 

Using UV-C disinfection has three benefits for processors. It reduces the probability of cross-contamination where pathogens are transferred from one product to another. Secondly, it extends the product’s shelf life because it is microbiologically cleaner. Finally, UV-C disinfection offers a financial saving because less fresh water is needed.

Do you want to learn more about UV-C disinfection? Contact Sormac today!

More about Product quality

Why do carrots turn white after peeling?
Why do carrots turn white after peeling?

Carrots are a great vegetable. They’re healthy, taste good, have a crunchy bite and an attractive colour that contrasts nicely with other vegetables. But it’s not all that easy to retain that bright o...

The difference between mechanical and thermal drying
The difference between mechanical and thermal drying

Many years of experience have made Sormac the specialist in washing and drying delicate leafy vegetables. Drying delicate leafy vegetables requires specific expertise and is divided into two main grou...

Be part of the vegetable processing revolution

Keep up with the latest news by registering for our newsletter.

Register for the newsletter

chat.svg

Do you have questions or feedback?

We love to learn. We'd therefore love to hear your feedback.

Contact us